tube mountainbike Early Rider Seeker 24 | 24" Kids mountainbike
SKU: 973659766
tube mountainbike

tube mountainbike Early Rider Seeker 24 | 24" Kids mountainbike

$23.38 $25.98
Save 10%
No.2 Bestseller on gjs315.com >

Pay in installments of $6.50 with ShopPay, AfterPay and Klarna

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 4 - Jul 9

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

tube mountainbike Early Rider Seeker 24 | 24" Kids mountainbikeAdventuring. Built to handle off road adventures with ease and a confident ride on varied terrain. The Seeker 24 comes equipped with a Shimano CUES 1x9 drivetrain with a light action thumb shifter ensures smooth, responsive shifting, while the 130mm crankarms offer efficient pedalling. Setup with powerful Tektro hydraulic disc brakes, sealed bearing wheels with bolt thru axles and Schwalbe Smart Sam 2. 3" tires, this bike is ready for anything from

Adventuring. 

Built to handle off-road adventures with ease and a confident ride on varied terrain. The Seeker 24 comes equipped with a Shimano CUES 1x9 drivetrain with a light-action thumb shifter ensures smooth, responsive shifting, while the 130mm crankarms offer efficient pedalling. Setup with powerful Tektro hydraulic disc brakes, sealed bearing wheels with bolt-thru axles and Schwalbe Smart Sam 2.3" tires, this bike is ready for anything from light trails to full on off-road adventures.

ASSEMBLY INSTRUCTIONS:

Your bike will arrive carefully packaged and boxed with the front and rear wheel detached. Attach both wheels using the skewers supplied and install the gearing mechanism. The handlebar will be zip tied to the top tube, simply remove the bars and all packaging and attach to the stem. Add the saddle and adjust to the required height. Then simply add the pedals. Please retain your manual.

 

[Left column]

INSIDE LEG

63CM

FRAME

HAND BRUSHED AL6061, FORGED SLIDING DROP OUTS

FORK

HAND BRUSHED AL6061, FORGED DROPOUTS

STEERER TUBE

AL6061

CRANKS

SAMOX 150MM DIRECT MOUNT, NQF

PEDALS

ER WORKS PLATFORM, CNC'D AL6061, STUDDED, CARTRIDGE BEARING

BOTTOM BRACKET

SAMOX 24MM EXTERNAL CUP, SEALED CARTRIDGE

RIMS

24 X 28H, DOUBLE WALLED AL6061, TUBELESS COMPATIBLE

REAR HUB

ER 4 BEARING CASSETTE FREEHUB, CNC'D AL6061

FRONT HUB

CNC’D 6 BOLT DISC, AL6061, QR SKEWER

CHAIN

KMC eGLIDE

CHAINRING

SAMOX BLACK DIRECT MOUNT STEEL 30T

REAR CASSETTE

SHIMANO 9-SPEED 11-36T

SHIFTER

SHIMANO CUES 9-SPEED TRIGGER

 

*Every effort has been made to ensure accuracy throughout this website. However, Early Rider reserves the right to change prices and bike specifications without prior notice*

CLICK HERE FOR THE USER MANUAL


[Right column]

WEIGHT

10.3KGS W/O PEDALS

DERAILLEUR

SHIMANO CUES 9-SPEED MECH

BRAKES

TEKTRO HYDRAULIC JR, 160MM ROTORS

LEVERS

TEKTRO SHORT REACH

FRONT TYRE

SCHWALBE SMART SAM 24x2.35", 67TPI WB

REAR TYRE

SCHWALBE SMART SAM 24x2.35", 67TPI WB

HEADSET

1 1/8” CARTRIDGE BEARING, CONVENTIONAL

STEM

FORGED AL6061, 35MM REACH

BARS

640MM DOUBLE BUTTED AL6061, 18MM RISE

GRIPS

ER LOCK ON KRATON 115MM

SEAT POST

AL6061, 27.2MM x 350MM

SADDLE

ER WING 2, BLACK

SEAT CLAMP

ER QR, 31.8MM 

 

[Table]
STANDOVER HEIGHT  63CM
FRAME HAND BRUSHED AL6061, FORGED SLIDING DROP OUTS
FORK HAND BRUSHED AL6061, FORGED DROP OUTS
STEERER TUBE AL6061
CRANKS SAMOX 150MM DIRECT MOUNT, NQF
PEDALS ER WORKS PLATFORM, CNC'D AL6061, STUDDED, CARTRIDGE BEARING
BOTTOM BRACKET SAMOX 24MM EXTERNAL CUP, SEALED CARTRIDGE
RIMS 24 X 28H, DOUBLE WALLED AL6061, TUBELESS COMPATIBLE
REAR HUB ER 4 BEARING CASSETTE FREEHUB, CNC'D AL6061
FRONT HUB CNC’D 6 BOLT DISC, AL6061, QR SKEWER
AXLES AL6061
CHAIN KMC eGLIDE
CHAINRING
 DIRECT MOUNT, NARROW WIDE 30T, STEEL
WEIGHT 10.3KGS W/O PEDALS
REAR CASSETTE SHIMANO 9-SPEED 11-36T
BRAKES TEKTRO HYDRAULIC JR, 160MM ROTORS
LEVERS TEKTRO SHORT REACH
FRONT TYRE SCHWALBE SMART SAM 24x2.35", 67TPI WB
REAR TYRE SCHWALBE SMART SAM 24x2.35", 67TPI WB
HEADSET 1 1/8” CARTRIDGE BEARING, CONVENTIONAL
STEM FORGED AL6061, 35MM REACH
BARS 640MM DOUBLE BUTTED AL6061, 18MM RISE
GRIPS ER LOCK ON KRATON 115MM
SEAT POST AL6061, 27.2MM x 350MM
SADDLE ER WING 2, BLACK
SEAT CLAMP ER QR, 31.8MM
DERAILLEUR SHIMANO CUES 9-SPEED MECH
SPEC NOTICE Every effort has been made to ensure accuracy throughout this website. However, Early Rider reserves the right to change prices and bike specifications without prior notice
[Table spec]
A Wheelbase 992.2mm
B Head Angle 67°
C Seat Tube Length 320mm
D Chainstay Length 392mm
E Seat Tube Angle 73°
F Standover Height 600mm
G Top Tube Length 513.5mm
H Head Tube Length
 92mm
I Stack
 497.3mm
J Reach
 361.5mm
K Fork Length 410mm
Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 973659766

Discover Niche Categories That Outsell tube mountainbike

Top-Converting Item to Boost Your Average Order

4.7 ★★★★★
Based on 1660 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
T
Verified Purchase
Tyi Campbell
West Palm Beach, US
★★★★★ 5
Great product and worth the money.
Size: 4 Panel-88'', Color: Black
Portable and stable. Perfect size and gives me the privacy I need when working from home. Stability is great as long as you place the stands correctly it won't wobble. I love it.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 8, 2026
M
Verified Purchase
Mona T.
Birmingham, US
★★★★★ 5
Attractive
Size: 4 Panel-88'', Color: Grey
The assembled product is just as described. The screens look great! I am using them to hide the cluttered shelving in my garage. The area now looks quite neat Something I must say, though, is that the assembly was extremely difficult. I had to use a silicone spray and some pounding to get the A and B poles to fit together. Also, it required a great deal of strength to stretch and hold the fabric panels so that the bars inserted in each hem lines up with the screws inserted in A/B poles. I strongly recommend having a partner to help with the assembly. while sc and screw into poles them once inserted intetchedtne end of each pole ( and B poles barely fit together. I used silicone spray on the end and then pounded them
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on December 12, 2025
K
Verified Purchase
karine
Belleville, US
★★★★★ 5
Works
Size: 3 Panel-102'', Color: Beige, Size: 3 Panel-102'', Color: Beige
It’s beige and not white. Once install - hard to disinstall. Need a drill to put it together
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 4, 2026
R
Verified Purchase
ralversity
New York, US
★★★★★ 3
Does the job, but assembling by yourself is a nightmare
Size: 4 Panel-88'', Color: Black
Does it do the job? Yes, although as others said there are small gaps but it's not a huge deal. The price is also good. But the reason I'm giving it a 3/5 is simply because the assembly for this was a complete nightmare. I honestly don't think I would recommend this to anyone unless they have another person to help them assemble it, because doing it by myself was terrible. I don't think I'd buy this again, I think I'd opt to just spend a bit more money and save myself the trouble personally.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 29, 2026
T
Verified Purchase
Talagand
Massapequa, US
★★★★★ 4
Reasonably adequate room divider
Size: 4 Panel-88'', Color: Beige
I'm reviewing this as I assemble it. Couple things: 1. I didn't expect as much assembly. I've ordered dividers before and they more-or-less came as one unit. Sometimes the panels needed screwing together. These require complete assembly and come largely as three rods: two make up vertical columns and snap together. Another one (called part "C") makes the horizontal columns and you have two of these per panel (one attaches to part "A" and the other part "B"). These parts are metal with a plastic shim. Using the wood screws to attach to part "C" is a real pain in the neck. There's not much holding the panel in place so it's a little tricky. One tactic I've found while I'm assembling that works for the initial connections from parts A and B to their respective "C" rods is to hold the screw in place with a screw driver and then rotating the rod around the screw. This will do a number on your hands if you aren't wearing gloves. This obviously doesn't work when completing the connection. Using a driller driver on this is really near impossible because there isn't anything you can use to secure it in place. You can use it on the first panel, but as it gets longer, it becomes increasingly difficult and because it isn't wood, it's really tight. I considered drilling larger pilot holes but since there are only 4x4=16 screws I need to screw in, I just decided to use my screw driver to complete it. 2. Also related to assembly. When completing the panels (attaching parts "A" and "B" to parts "C" that have the cloth cover on it), you have to be careful that when you tighten that side that it isn't loosening the other side. Because the pilot holes are so tight, you can end up rotating the rod, which rotates it in the same direction as looser on the original side. Having someone hold the "C" rod in place while you screw it in is probably the easiest approach. I didn't have a 2nd person, so I just had to keep flipping back and forth and tightening both sides as I screwed it in. Not the worlds biggest deal, but annoying nonetheless. 3. The way the instructions are written, they seem to suggest building this thing progressively; that is, you do panel 1, then 2, connect them together, then do 3 and connect it, etc. I took a different route that I suspect saved me quite a bit of trouble, and I assembled all four panels first and THEN connected everything together. 4. For the love of God make sure you check that the plastic tip is on the same side for every panel. Otherwise, you have to take one side apart again and reverse it. On the bright side, if this happens, you've essentially bored out the pilot holes to be the correct size... which is having me question if I shouldn't have just bored them out to the appropriate width in the first place. 5. Attaching all of the panels together is also an enormous pain in the ass unless you happen to have an 88" long elevated surface. Attaching the legs either requires you to elevate one side, which will invariably twist the inexplicably cheap material in the bottom connectors... or you can attach them sideways... or you can put this thing upright, having two people hold the panels in place while you use the allen wrench to tighten the bolts on the underside. None of those are particularly great options. NOW on to the utility itself. 1. The panels do let some light through (I didn't believe their advertising, and that was one of the reasons that I bought beige, is that I wanted it to not be too dark). They aren't transparent though, so it isn't that far off from their description. They functionally work great, and keep the mess of wires hidden and when I'm sitting at my desk, actually reflect quite a bit of light into my office. Great! 2. My wife has described these as "the most hideous piece of furniture ever conceived of by man." So it does not have spouse approval factor. Granted, she will seldom be in my office area, so that isn't the end of the world. 3. These are really hard to align in a way that doesn't look a little tacky. There are some plastic connectors but they don't do a bang up job of keeping these in place. Each panel is slightly tilted and it's... quite obvious. I may at some point make my own improvements to these to help make them more level. It's not a particularly expensive product so I wasn't expecting much so it's fine and I'm not going to ding them on the rating because of it. All said, would I buy this product again? Probably not. It's assembly was ~90 minutes which is about 75 minutes longer than I was anticipating spending on this (not including the 5 minute writeup that I'm doing here). But am I going to return it? Also no, if for no other reason I'd be just as annoyed taking it apart and putting it in the original box to return it.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on October 31, 2023

recommand products

Fahrrad Wandhalterung, Fahrradlift vertikal Bikelift PARKIS CITY
20.00
Basil Cove 16 l
24.85
HENMI Fahrradständer 24-29 Zoll,Fahrradständer mit 2 Löchern,Stabil Se
28.05
Basil Urban Dry Business Fahrradtasche 20l Gepäckträgertasche | grau
23.06
KTM Fahrradständer Seitenständer Mittelbauständer 28 Zoll " Fahrrad Original
26.40